Reset WiFi Stick
to Factory Settings
If your Solis WiFi Data Logger is having issues such as not connecting to the local network or not providing the "AP" (Access Point) network required for configuration, resetting it to factory default could be the fix that you need.
Video Tutorial
Factory Reset Instructions
Hold it down for 5 seconds. Note: the logger needs to be connected to a powered-on inverter.
If you take the case off and you can find a button like so circled in red:
If that button isn't there, then you have the earliest model and you will need to short the two pins circled in red. Do this by using a small piece of wire or a paper clip to touch the two points together for 5 seconds, this will reset it (again, do this while the logger is connected to a powered on inverter so that the lights are on).
After Resetting
After resetting your WiFi stick to factory settings, you'll need to reconfigure it. Follow our Wi-Fi Data Logger Setup Guide to reconnect to your home network.
What to expect after reset:
- The WiFi stick will create an "AP" network again
- All previous network settings will be cleared
- Default login credentials will be restored to "admin/admin" or "admin/123456789" depending on your device
Troubleshooting Tips
Reset Not Working?
If the reset procedure doesn't work, try disconnecting power from both the WiFi stick and inverter for 5 minutes, then reconnect and try again.
LED Indicators
- NET & COM Flashing: During reset process
- All lights off: Check power connection to the inverter
Can't Find Reset Button or Pins?
Different models have slightly different layouts. If you're unsure which reset method to use, contact our support team for model-specific guidance.